[SEL] shim stock

[frank skinner]

Jimmy;
Some years ago laminated shims were available in brass,
it was brass shim stock soldered together.
As need be a single shim could be easily pealed away,
to adjust for wear. 
 
Gooh luck 
 
                  Best Regards
             
           Franklin S. Skinner 
      Marine Surveyor & Consultant 
3428 Talon Court Wilmington NC 28409 
       34'10.9 North 74'52.4 West 
PH 910-791-8870  Cell 910-612-7470



 

> From: jdohagan at comcast.net
> To: sel at lists.stationary-engine.com
> Date: Fri, 16 Sep 2011 14:31:54 -0700
> Subject: [SEL] shim stock
> 
> Hello everyone. I need some advice. I'm putting a 8 horse F.M. "N" together
> and it is a nice basket case. Did it have shims under the mains originally
> or did they float and rely on the double nuts? If it had shims ,what
> material was it? Thanks in advance, Jimmy O'Hagan, Novato, Ca. 415 892 0236
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel