[SEL] Custom headers

Dave Rotigel rotigel at me.com
Mon Aug 29 18:41:43 PDT 2011


DEVIN, CALL YOUR MOTHER!!!!!!!!!!
	Dave

On Aug 24, 2011, at 11:30 PM, Devin Holland wrote:

>
> I would suggest going by harbor freight and getting a impact socket  
> (thicker and its a 6point so its stronger) and useing a lathe on a  
> slow speed with a grinder so that u can get a nice even grind.
>
>
> Devin Holland
> Wish i was a in Portland but sadly im in my dorm is their a  
> collector on here near uah?
>
>
>
>
>
>> First thing I discovered last night is I couldn't get a socket on  
>> any of the header flange bolts, and could only get a box end wrench  
>> on one of the bolts.  Luckily and open end wrench was sufficient to  
>> undo the others although movement was very limited.  I'll probably  
>> check a tool store and see if a thin-wall socket will work.  Also  
>> considered modifying a box-end wrench by heating it up and bending  
>> it some, plus grinding off excess metal around the box-end.  Maybe  
>> a modified wrench is what I need.
>
>
>
>
>
>
> 		 	   		
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel




More information about the sel mailing list