[SEL] Custom headers

[Devin Holland]

I would suggest going by harbor freight and getting a impact socket (thicker and its a 6point so its stronger) and useing a lathe on a slow speed with a grinder so that u can get a nice even grind.


Devin Holland
Wish i was a in Portland but sadly im in my dorm is their a collector on here near uah?





> First thing I discovered last night is I couldn't get a socket on any of the header flange bolts, and could only get a box end wrench on one of the bolts.  Luckily and open end wrench was sufficient to undo the others although movement was very limited.  I'll probably check a tool store and see if a thin-wall socket will work.  Also considered modifying a box-end wrench by heating it up and bending it some, plus grinding off excess metal around the box-end.  Maybe a modified wrench is what I need.