[SEL] OT - Thin wall socket

[Dave Rotigel]

I picked up a very nice set of thin wall sockets at Portland this past  
week. The 1" is missing from the set , but it goes from 3" down to 7/8"
	Dave

On Aug 23, 2011, at 1:17 PM, Best, George wrote:

> After checking a couple likely stores and finding no thin wall  
> sockets, I'm wondering about making my own.
>
> Would it work to take an old cheap socket and turn the outside down  
> on my lathe?
>
> Anyone try turning down a socket diameter before?