[SEL] OT - Thin wall socket

[Best, George]

Dave,

Glad you were able to find thin wall sockets for your 1" drive set. :-)
Although at your age, you should probably be sticking to projects that you can use your 1/4" or 3/8" drive.

Of course if you replace all your sockets with lighter thin wall versions, you may extend the time you'll be able to get your nuts off. ;-)

George

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com [mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Dave Rotigel
Sent: Monday, August 29, 2011 1:26 PM
To: The SEL email discussion list
Subject: Re: [SEL] OT - Thin wall socket

I picked up a very nice set of thin wall sockets at Portland this past  
week. The 1" is missing from the set , but it goes from 3" down to 7/8"
	Dave



This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.