[SEL] OT - Thin Wall Socket

[Best, George]

Since the engine has aluminum heads I was planning on using some anti-seize.
I was glad the old bolts came out as easy as they did.

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com [mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of sluggo54 at hotmail.com
Sent: Thursday, August 25, 2011 9:45 AM
To: sel at lists.stationary-engine.com
Subject: [SEL] OT - Thin Wall Socket

"If you're going through all the trouble of replacing them, George, it might be a good idea to consider stainless with a Torx head.

Rob"

I second the motion, and suggest adding a large dollop of a good anti-seize.

Bruce Younger

A serious writer is not to be confounded with a solemn writer. A serious writer may be a hawk or a buzzard or even a popinjay, but a solemn writer is always a bloody owl.
E. Hemingway
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.