[SEL] Salt water rust

[jbcast at charter.net]

---- Jim O'Hagan <jdohagan at comcast.net> wrote: 
> Hi, I could use some help . There has been several discussions on rust
> removal over the years. Some worked better than others but all were for
> light coatings of fresh water rust. I have a marine engine with the water
> jackets splitting and falling off the cylinders. Short of sawing large
> windows in the remaining jackets and chiseling the black rust,1/2" thick and
> brazing/welding the windows back up,are there other remedies? Thanks for any
> ideas. Jimmy O'Hagan,415 892 0236
> 
>  
> 
> Jim O'Hagan
> 
Jim, go to the site below and see what George Coates does with heat.

http://www.oldmarineengine.com/discus/messages/1/91556.html#POST16229

J.B. Castagnos