[SEL] SEL Digest, Vol 69, Issue 17

[Jerry Evans]

At 07:00 PM 17/12/2009, you wrote:
>Message: 7
>Date: Thu, 17 Dec 2009 10:57:46 -0500
>From: "Larry Anger" <langer5 at sympatico.ca>
>Subject: Re: [SEL] Etched brass plates.
>
>Jerry also made me some plates for a Canadian built engine. He made them
>from a photo of an original plate that I had. The results were
>fantastic,better than original. I was extremely happy with his work.
>
>Larry Anger
>163926 Brownsville Rd.
>R.R. 3 Tillsonburg, Ontario
>Canada N4G 4G8
>----- Original Message -----
>From: "Arnie Fero" <fero_ah at city-net.com>
>To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
>Sent: Thursday, December 17, 2009 10:16 AM
>Subject: Re: [SEL] Etched brass plates.
>
>
> > HEAR!!  HEAR!!  Not only does Jerry do an EXCELLENT job of reproducing a
> > manufacturer's plate; he is also FANTASTIC at creating a new plate in the
> > vintage
> > style.  He did one for me for the "Fankhauser Engine Company" for an
> > engine that my
> > engine buddy, the late John Fankhauser, built.  What a gorgeous tag.  It
> > is a very
> > nice finishing touch for the engine.
> >
> > In fact, those of you who design and build model engines should have Jerry
> > design
> > and build "maker's plates" for your engines.  8-))
> >
> > See ya,  Arnie
> >
> > On Thu, December 17, 2009 8:09 am, Bill Brueck wrote:
> >> A  bargain at any price.  I've bought a number of plates from Jerry and
> >> the
> >> workmanship is superb.


Aawwww Geee Guys,
         You're making me blush :-)

         Thanks for all the nice comments - they are appreciated. I've 
enjoyed making plates for all of you.


Keep the revs up (or down)
Jerry Evans
Near Johannesburg in Sunny South Africa.
Etched Brass Engine Plates made to order:
<www.oldengine.org/members/evans/plates/index.htm>