[SEL] Villiers C12A - 04 - 09

[peter ogborne]

Al ,I am guessing the engine is a four cycle and has a seperate magneto,ie 
not a flywheel magy.
Are you sure the flywheel is keyed?
What are the two holes that we can see [look about 6mm] are they threaded 
and are there more ?
A method that can be tried is whilst prying the flywheel away from the 
backing plate tap the rim with a wooden mallet .It will be sitting on a 
taper and just might spring off.
----- Original Message ----- 
From: "Al Harris" <al.harris at rustic-engines.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Saturday, September 20, 2008 12:30 PM
Subject: Re: [SEL] Villiers C12A - 04 - 09


>I should have posted a photo Dave. My bad.
>
>> http://www.rustic-engines.com/media/pics/temp/Picture%20005m.jpg
> The nut rests up against the flywheel, it is not an integral part of it.
> As you can see there is nowhere to get leverage on the flywheel (we know
> there must be though).
> It is not like your standard Villiers flywheel eh.
>
> Cheers,
>
> Al Harris
> Winter Clarence Coast NSW Oz
>
> al.harris at rustic-engines.com
>
>
>
> Dave Croft wrote:
>> ----- Original Message ----- 
>> From: "Al Harris" <al.harris at rustic-engines.com>
>> To: "SEL" <sel at lists.stationary-engine.com>
>> Sent: Saturday, September 20, 2008 2:07 AM
>> Subject: [SEL] Villiers C12A - 04 - 09
>>
>>
>>
>>> Can someone inform me about the correct way to remove a Phelon flywheel
>>> from this beast?
>>>
>>> There is no apparent fitting points to use a standard puller (thread or
>>> hook types) and the flywheel is keyed.
>>>
>>
>>
>>> Cheers,
>>> Al Harris
>>> Winter Clarence Coast NSW Oz
>>> al.harris at rustic-engines.com
>>>
>>
>> Is the flywheel also part of the magneto?
>> If so see
>> http://home-and-garden.webshots.com/photo/1344869335028520097Gdftrx
>> On most of the Villiers smaller engines the securing bolt was also the 
>> removal device.
>> Dave Croft
>> Warrington
>> http://www.oldengine.org/members/croft/
>> http://community.webshots.com/user/crftdv
>>
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>>
>>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>