[SEL] Witte Diesel 12 H.P. - more help please.

[Nick Holden]

Hi Jerry
Try your local diesel repair shop as American Bosch pumps etc are available
hear in the UK if you find a good one I have used http://www.dieselinjectors
co.uk/ these people before and they are good 
 
 
Nick
Banbury (UK)
http://community.webshots.com/user/nickholden
 
-------Original Message-------
 
From: Jerry Evans
Date: 07/02/2008 19:47:49
To: sel at lists.stationary-engine.com
Subject: [SEL] Witte Diesel 12 H.P. - more help please.
 
Hi Guys,
         As some of you know, I have a 12 H.P. Witte diesel (Model CD)
which I'm going to start on soon. This will be my first diesel engine so
I'm on a steep learning curve.
 
         Today I received the parts that I'd ordered from David Johnson
<wittemania at cox.net>
and must say that I'm very impressed - good quick service and everything as
described.
 
         Due to other pressures I've not done anything to the engine (or
any engine for that matter) for 2 months but had sent the injector pump and
injector into a diesel shop to have them checked out.
 
         Today I received the bad news that the nozzle (and needle) is
toast and have not heard about the pump yet. I had previously asked David
Johnson if he had parts for the injection system but he does not.
 
         An internet search for "American Bosch" turned up AMBAC (formerly
American Bosch) <http://www.ambac.net/>
but they have one of the poorest websites I've seen in a long time without
even an eMail contact address - just a few phone numbers in Elgin, South
Carolina. Even some pages "Still under Construction" - very bad for a
company website!  Even their "Latest news" page was last updated in 2005.
 
         So now it's over to all the Gurus on the lists again:
a) Can anyone in the States try to phone them for me and find out if any
parts are available and if they have an eMail address.(Part Numbers
follow). They list this telephone number.
Toll Free Phone  . . . . . . . .  . . . . . . . . . . . . . . . . . . . . .
.. . . . . . . (800)628-6894
 
Part Numbers: American Bosch. The nozzle Holder is  AKB 50 S 1910 A. ( I do
not need this part - just giving it for reference)
The nozzle (and needle) has the letters - 449   USA  ADN-4S-3 (This is the
part I need).
 
b) If these parts are no longer available what ideas can you guys give me
to get the engine going again - as mentioned, this is my first diesel so
I'm stupid. Can nozzles be "fixed" or are their nozzles from other
manufacturers that could be substituted or would I need to replace the
whole system (sounds costly - especially on my limited budget).
 
         Thanks in advance.
 
Keep the revs up (or down)
Jerry Evans
Near Johannesburg in Sunny South Africa.
Etched Brass Engine Plates made to order:
www.oldengine.org/members/evans/plates/index.htm
 
 
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel
 
 
--
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.516 / Virus Database: 269.19.21/1265 - Release Date: 07/02/2008
11:17
 
.