[SEL] Crankshaft extending

[R & M Ingold]

Another approach is to mount the pulley on the flywheel spokes.
(As a lot of makers did)
Reg & Marg Ingold.
Newcastle, NSW, Australia.
randmingold at hotkey.net.au
http://www.oldengine.org/members/randmingold

----- Original Message ----- 
From: "Alan Bowen" <rustaholic777 at yahoo.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Thursday, September 13, 2007 8:27 AM
Subject: Re: [SEL] Crankshaft extending


> Sure,,,
> Then if the next guy is like me he will see that pulley and start looking 
> for what he can run with that engine.
> Of course if your welding job is done right with the addition of that 
> internal pin that should be a pretty strong shaft extension.
>
> Alan Bowen
> Williamsburg, Michigan
>
> David Rotigel <rotigel at alltel.net> wrote:
> George, Then your "fix" is a good one!
> Dave
>
>
> On Sep 12, 2007, at 3:38 PM, Best, George wrote:
>
>>  Dave,
>>
>> It would be mostly for looks and I'd possibly put a pulley on it at
>> some
>> point but don't know that it would ever be belted up to anything.
>>
>> George
>>
>> -----Original Message-----
>> From: sel-bounces at lists.stationary-engine.com
>> [mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of David
>> Rotigel
>> Sent: Wednesday, September 12, 2007 12:01 PM
>> To: The SEL email discussion list
>> Subject: Re: [SEL] Crankshaft extending
>>
>>
>>> Does this sound like a feasible way to fix the crankshaft?
>>
>> It would seem to depend on what you are going to attach to the
>> "extended
>> portion of the shaft and what speed you will be running it at.
>>  Dave
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>>
>>
>> This message and any attachments are intended only for the use of
>> the addressee and may contain information that is privileged and
>> confidential. If the reader of the message is not the intended
>> recipient or an authorized representative of the intended
>> recipient, you are hereby notified that any dissemination of this
>> communication is strictly prohibited. If you have received this
>> communication in error, please notify us immediately by e-mail and
>> delete the message and any attachments from your system.
>>
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>
> ---------------------------------
> Check out  the hottest 2008 models today at Yahoo! Autos.
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>