[SEL] Adjusting Rosebery 3C bearings?

Ray And Erica Freeman plb at iinet.net.au
Sat Nov 10 21:43:46 PST 2007


I've got a few each of these engines but have not had the bottom end apart
yet. You should be able to get a service book from Greg McNiece at
www.rallybadges.com.au  He has them advertised for 11 Dollars.
Ray Freeman
Perth WA

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Glen Harris
Sent: Sunday, 11 November 2007 2:15 PM
To: The SEL email discussion list
Subject: [SEL] Adjusting Rosebery 3C bearings?

I'm posting this on behalf of my father, who has a Buzacott/Rosebery with a 
nasty knock in the main bearings - they're rather worn and he can wobble the

crankshaft by hand. The instruction manual mentions adjusting the bearings, 
but with no details on how to go about it. The parts list shows the 4C and
6C 
have a two part bearing which would be adjustable, but not the 2C or 3C. Is 
this fixable in a garage workshop, or is it beyond his means?

On a related note, is there a service manual for these engines?

Thanks, glen.
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel



More information about the sel mailing list