[SEL] Adjusting Rosebery 3C bearings?

[Glen Harris]

Which product_id are you referring to? I bought 1154 "Rosebery C 2,3,4, & 6hp 
Vertical Engines" for him some time ago, which is the operating instructions. 
Can you point me to which one is the service manual?

Ray And Erica Freeman wrote:
> I've got a few each of these engines but have not had the bottom end apart
> yet. You should be able to get a service book from Greg McNiece at
> www.rallybadges.com.au  He has them advertised for 11 Dollars.
> Ray Freeman
> Perth WA
> 
> -----Original Message-----
> From: sel-bounces at lists.stationary-engine.com
> [mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Glen Harris
> Sent: Sunday, 11 November 2007 2:15 PM
> To: The SEL email discussion list
> Subject: [SEL] Adjusting Rosebery 3C bearings?
> 
> I'm posting this on behalf of my father, who has a Buzacott/Rosebery with a 
> nasty knock in the main bearings - they're rather worn and he can wobble the
> 
> crankshaft by hand. The instruction manual mentions adjusting the bearings, 
> but with no details on how to go about it. The parts list shows the 4C and
> 6C 
> have a two part bearing which would be adjustable, but not the 2C or 3C. Is 
> this fixable in a garage workshop, or is it beyond his means?
> 
> On a related note, is there a service manual for these engines?
> 
> Thanks, glen.
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>