[SEL] Tank Cooled Engine - Pipe Fitting Suggestions Needed

[Mike Royster]

Talk to Steve (evil), as he has been successful with his methods.
Mike
----- Original Message ----- 
From: <fero_ah at city-net.com>
To: "Stationary Engine List" <sel at lists.stationary-engine.com>; "Old_Engine" 
<stationary-engine at oldengine.org>
Sent: Sunday, July 29, 2007 11:25 AM
Subject: [SEL] Tank Cooled Engine - Pipe Fitting Suggestions Needed


> Hi Folks,
>
> I'm working on a 4 hp tank-cooled Lister L.  The tank that I'm starting 
> with is
> an ordinary 30-gallon drum so I need to put three opening in the sides. 
> One
> each for inlet and outlet pipe nipples and one near the bottom for a
> faucet-type drain.
>
> Before I just started hacking away, I figgered I'd tap the collective 
> experience
> of the lists.  What have you done that worked well?  What should I avoid? 
> Any
> suggestions would be appreciated.  Thanks.
>
> See ya,  Arnie
>
> Arnie Fero
> Pittsburgh, PA
> fero_ah at city-net.com
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel