[SEL] Kwik Poly Sealer

[Skip Cleveland]

You know what?
You could keep pouring that stuff in like you say until the tank will no 
longer be able to hold any gas to leak out.
That would work.
Skip
----- Original Message ----- 
From: "Rob Skinner" <rskinner at rustyiron.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Friday, July 27, 2007 11:20 AM
Subject: Re: [SEL] Kwik Poly Sealer


>
> On Jul 27, 2007, at 4:47 AM, Curt wrote:
>> To avoid the re-stick issue that Dave
>> mentioned, one could mix another portion and pour it in just as the
>> first batch was beginning to thicken, but not set yet. By getting the
>> timing right where you are pouring new material in over setting
>> material,
>
> Hey Curt,
> I've done exactly as you described:  pour it in, let it set up, pour
> some more in, let it set up, pour some more in, tire of he process
> and call it good.  I suspect the "no stick" instructions might be
> referring to KP that has completely set up and is like a rock.  That
> takes hours to happen.
>
> Rob
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.476 / Virus Database: 269.10.22/922 - Release Date: 7/27/2007 
> 6:08 AM
>
>