[SEL] Kwik Poly Sealer

[David Rotigel]

Hi Russell,
	No leaks, just my "newness" to the hobby and thinking that since QP  
worked so well I'd put it in EVERYTHING!
		Dave


On Jul 26, 2007, at 5:29 PM, Russell Gilbert wrote:

> Hey dave who made your new tank? I recon that if you needed to put QP
> in it then you should have taken it back and swapped it for one that
> didn't leak!  Of interest; are you guys using this stuff to spare
> costs of getting a repo tank, can't get a repo tank ot just want to
> keep the original a little longer.
>
> I sometimes see some real shitty tanks on rally feild (both feul and
> water tanks) which is disapointing when you see how much work they
> have put into a resto but then hand some crappy bling around it.
> Russell
>
>
> At 11:34 PM 26/07/2007, you wrote:
>> Hi Allen,
>>         QP cures (ready for use) in about 20 minutes, It will seal  
>> off all
>> the loose rust in the tank, it will also "bridge holes up to about
>> 1/8". The stuff that Lee sells is good, but I think that if you use
>> QP once you will be sold on if for all future use. The ONLY trouble
>> I've ever had with QP was once when I used it on a new galvanized
>> tank w/out first using mild acid on the tank. The QP did not "stick"
>> and became a real mess inside the tank. However, I don't think any
>> other sealer would have worked w/out the acid first, so that's not
>> really much of a criticism of QP!
>>         Dave
>> On Jul 26, 2007, at 8:44 AM, Alan Bowen wrote:
>>
>>> Hi Joe,
>>> What is the advantage of Kwik Poly over the tank sealer that Lee
>>> Pedersen  sells?
>>>
>>> http://www.enginads.com/pedersen/index.html
>>>
>>> I really like the idea of pouring some in the tank, sloshing it
>>> around then pouring the extra back into the can for later use.
>>>
>>> Alan Bowen
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>
> Russell Gilbert
> Sunny Sunraysia
> russell at ncable.com.au
> http://community.webshots.com/user/russellsrelics
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel