[SEL] How Hot Does a Muffler Get

[Paul Maples]

Thanks Elden


----- Original Message ----- 
From: "Elden DuRand" <edurand at cybertron.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Saturday, February 10, 2007 7:49 PM
Subject: RE: [SEL] How Hot Does a Muffler Get


> Paul:
>
> If it only has to be flat black, just go to your local hardware store and 
> get a small can of brush-on barbeque paint and apply it according to the 
> instructions.  You could probably remove some of the pits by sanding the 
> surface of the paint after it has dried and cured from heat.  Then you 
> could add another coat and repeat the process 'til it's better than new 
> looking.
>

>