[SEL] Webster type 1A

Craig Buzzell craigb2 at aol.com
Sat Dec 15 18:56:46 PST 2007


Glenn; Thanks for the info.
Craig
On Dec 15, 2007, at 6:27 PM, Glenn Karch wrote:

> Craig,
>
> The later Hercules and Economy literature has info on the Webster 1A  
> setup.  It was not one of the best systems and was frequently  
> replaced with other ignition systems alternatives.
>
> Glenn
>
>
>
> ----- Original Message ----
> From: Craig Buzzell <craigb2 at aol.com>
> To: The SEL email discussion list <sel at lists.stationary-engine.com>
> Sent: Saturday, December 15, 2007 6:08:18 PM
> Subject: [SEL] Webster type 1A
>
> Hello List; I am looking for info on the Type 1A Webster. I have one
> on my newly acquired Monarch Model N. It seems to be hot as I got a
> good pop on ether as the fuel is not hooked up yet. The cam  & exhaust
> valve trip rod does not go all the way back by itself so as I pull it
> over the mag trip mechanism does not engage. Am I missing a return
> spring or is it an adjustment issue?
> My Economy's and Stover have a return spring on the shaft but this
> shaft is rectangular and does not seem compatible with a round coil
> spring.
> Thanks for your help;
> Craig Buzzell
> Goleta CA
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel




More information about the sel mailing list