[SEL] Need Used Vertical Metal Bandsaw

[Paul Maples]

Thanks Peter.

Paul

----- Original Message ----- 
From: "peter ogborne" <jopeter at omninet.net.au>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, August 21, 2007 5:44 PM
Subject: Re: [SEL] Need Used Vertical Metal Bandsaw


> Paul....a couple of things to think about on your modification.With those
> little Chinese band saws when in the vertical position you do not have the
> switch off operating as the arm falls. It is hazardous if you are trying 
> to
> hold the work and reaching down to hit the little toggle switch..a no volt