[SEL] removing stuck piston - Yahoo it's out

[Paul Maples]

Congrats Peter, I know this is a relief.

Paul

----- Original Message ----- 
From: "Peter Lowe" <plowe at exemail.com.au>
To: "ATIS" <sel at lists.stationary-engine.com>
Sent: Sunday, August 12, 2007 12:51 AM
Subject: [SEL] removing stuck piston - Yahoo it's out


> Hi All
>
> Well what an anti-climax, I stuck a lump of 2" x 4" hardwood under the
> conrod, after I removed the crankshaft, gave it two hits with a 2lb hammer
> and the piston jumped over an inch. I then pushed on the timber and out it
>