[SEL] Gib Key Removal

[Paul Maples]

Nice idea Mark but the one I had looked like a little like a tire iron but I 
think the wedge ones would work just as well, now off to find a pattern.

Paul

----- Original Message ----- 
From: "Mark Shulaw" <frappi at wcoil.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Wednesday, October 25, 2006 10:41 PM
Subject: Re: [SEL] Gib Key Removal


> Hi Paul,
>  Make one, Its a simple tool to make.  A piece of 3/8" or similar 
> thickness flat steel a hack saw and a grinder or file and you should have 
> one shaped out in less time then you've spent looking for the old tool. Or 
> as Tommy said a gradual taper chisel or a LARGE flat blade screw driver 
> and a piece of metal to take up the spare space.
>
>                                        Good Luck,   Mark
>