[SEL] Re: Found Oil Field Engine Update

[Arnie Fero]

Hi Ed,

Contact the spare parts folks at Arrow Engines.
http://www.arrowengine.com/

Give them the assorted part numbers.  They will be able to tell you what
make and model the engine is, when it was built, and how much the missing
parts would cost.

See ya,  Arnie

Arnie Fero
Pittsburgh, PA
fero_ah at city-net.com

On Tue, 10 Jan 2006, Ed wrote:

> We went out to look at this little jewel again today:
>  The flywheels are 46.5 inches in diameter and 4 1/8 wide on a 3.5 inch
> diameter shaft. The number  ZFB13C1 is on it.
> There is a number 3   3   59 cast into the cover of the crank case. I need
> to know if this is a casting date because if it is I will pass this engine
> up.
> The clutch has Arrow 15A    MM  on it and a symbol GTI inside a diamond on
> it.
> The fan pulley has ZF  86070A  cast into it.  Should probably be ZFB 6070 A.
> The radiator mount has ZFB 502A 10 cast into it.
> The crank case has ZFB 2A26 CAST  into it with KC above it and  3   6  59
> above that. Again I need to know if these are casting date numbers.
> I recognise the ZFB part numbers as Fairbanks-Morse. The man on the seen
> said it was 18 HP. There are two screws under the radiator where I think the
> name plate went; no s/n stamped in the cast iron. The pictures are at
> http://home.earthlink.net/~edstoller/id12.html  .