[SEL] New Way Vertical 4 1/2 hp Model E, Type C

[Richard Strobel]

Chester..on this page are the last pix's with dimensions of the shaft 
assembly.

http://community.webshots.com/album/471752277SOWnom/4

email if any questions..do you need the fan now?

RickinMt.


----- Original Message ----- 
From: "SERVICE" <edwards_service at westnet.com.au>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Wednesday, October 19, 2005 12:32 AM
Subject: Re: [SEL] New Way Vertical 4 1/2 hp Model E, Type C


> Rick, excellent, appreciate the effort, this will make my job so much
> easier, cheers for now,
> Chester from West Aussie
>
>
> ----- Original Message ----- 
> From: "Richard Strobel" <Richard_Strobel7 at msn.com>
> To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> Sent: Wednesday, October 19, 2005 10:29 AM
> Subject: Re: [SEL] New Way Vertical 4 1/2 hp Model E, Type C
>
>
> > Chester..here's the best I can do with what I got..this is just the
> > shaft..other components will be measured ASAP
> >
> > Any questions, just holler,
> >
> > And of course all measurements are in inches and/or decimals there of
> >
> > Might be handy also if once downloaded you clicked on the bigger 
> > picture.
> >
> > Hope this helps and good luck
> >
> > http://community.webshots.com/photo/471752277/480760660hhdskP
> >
> > RickinMt.
> >
> >
> >
> >
> >
> >
> > ----- Original Message ----- 
> > From: "SERVICE" <edwards_service at westnet.com.au>
> > To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> > Sent: Tuesday, October 11, 2005 10:19 PM
> > Subject: Re: [SEL] New Way Vertical 4 1/2 hp Model E, Type C
> >
> >
> > > Hi Rick, great shots, as mine is missing the fan assembly it will be a
> > > great
> > > help to me, if you can when you remove the fan can you take some shots
> of
> > > how the drive pulley and pipe etc all goes together as that is my next
> > > fabricating job,
> > > Cheers Chester from West Aussie.
> > >
> > >
> > > ----- Original Message ----- 
> > > From: "Richard Strobel" <Richard_Strobel7 at msn.com>
> > > To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> > > Sent: Wednesday, October 12, 2005 12:17 AM
> > > Subject: Re: [SEL] New Way Vertical 4 1/2 hp Model E, Type C
> > >
> > >
> > > >    Ok Missy, Curt and gang (women come first in Mt. :-))  I went out
> and
> > > > shot around 20 pix's
> > > >
> > > > If they don't show up wait and hour or so as it takes Webshots a 
> > > > while
> > > > to
> > > > digest them.
> > > >
> > > > Hope this helps.  I'll try to get a diameter/circumference of the 
> > > > fan
> > > assy.
> > > > The outer ring does turn with the blades.  The album title says 4 hp
> but
> > > > it's a 4 1/2.
> > > >
> > > > http://community.webshots.com/album/471752277SOWnom
> > > >
> > > > Speaking of Webshots..I've never received any bill or statement and 
> > > > I
> > > don't
> > > > like suprises..are you subscribers getting any?
> > > >
> > > > Let me know if a certain area needs a better pix.
> > > >
> > > > "headed fer the shed"
> > > > RickinMt.
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > SEL mailing list
> > > > SEL at lists.stationary-engine.com
> > > > http://www.stationary-engine.com/mailman/listinfo/sel
> > >
> > > _______________________________________________
> > > SEL mailing list
> > > SEL at lists.stationary-engine.com
> > > http://www.stationary-engine.com/mailman/listinfo/sel
> > >
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>