[SEL] New Way Vertical 4 1/2 hp Model E, Type C

[SERVICE]

Hi Rick,
these mixers have no needle valve, they just use the choke disc to adjust
mixture, i am currently trying to fabricate one out of pipe fittings. I did
ask a foundry about casting one, but they said because of design the cost
would be prohibitive.
Cheers, Chester from West Aussie.


----- Original Message ----- 
From: "Richard Strobel" <Richard_Strobel7 at msn.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, October 11, 2005 10:25 PM
Subject: Re: [SEL] New Way Vertical 4 1/2 hp Model E, Type C


> Thank you Luke!!! Once again the SEL shines big time.  It is very similiar
> to mine.  So the mixer looks very basic with what looks like a choke lever
> and must be a needle valve in there somewhere.
>
>   Yours has the spark saver in the same place and gov mechansim looks the
> same.  Will study the pix's again.
>
> You Da Man
> Rick
>
>
> ----- Original Message ----- 
> From: "Luke Tonneberger" <flywheelin at hotmail.com>
> To: <sel at lists.stationary-engine.com>
> Sent: Tuesday, October 11, 2005 7:24 AM
> Subject: RE: [SEL] New Way Vertical 4 1/2 hp Model E, Type C
>
>
> > Hi Rick,
> >
> > Here are a few pics of one I used to own. Not the greatest.......
> >
> > http://www.oldengine.org/members/luket/newway/newway.html
> >
> > I wouldn't lift it from the spark plug hole. I don't like the idea
either.
> >
> > Luke Tonneberger
> > Rockford, Michigan
> > USA
> > =========================
> >
> > >From: "Richard Strobel" <Richard_Strobel7 at msn.com>
> > >
> > >   Is there anyone on the list that has a New Way and can snap a few
> > >pix's?..you'd be my friend forever..this is a very kewl engine!!!
> > >
> > >  whatcha all think
> > >about lifting a engine using the spark plug hole?  I personally don't
> > >like
> > >it.
> > >
> > >Ya'll have a nice day
> > >RickinMt.
> >
> >
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> >
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel