[SEL] New Way Vertical 4 1/2 hp Model E, Type C

[SERVICE]

Rick, excellent, appreciate the effort, this will make my job so much
easier, cheers for now,
Chester from West Aussie


----- Original Message ----- 
From: "Richard Strobel" <Richard_Strobel7 at msn.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Wednesday, October 19, 2005 10:29 AM
Subject: Re: [SEL] New Way Vertical 4 1/2 hp Model E, Type C


> Chester..here's the best I can do with what I got..this is just the
> shaft..other components will be measured ASAP
>
> Any questions, just holler,
>
> And of course all measurements are in inches and/or decimals there of
>
> Might be handy also if once downloaded you clicked on the bigger picture.
>
> Hope this helps and good luck
>
> http://community.webshots.com/photo/471752277/480760660hhdskP
>
> RickinMt.
>
>
>
>
>
>
> ----- Original Message ----- 
> From: "SERVICE" <edwards_service at westnet.com.au>
> To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> Sent: Tuesday, October 11, 2005 10:19 PM
> Subject: Re: [SEL] New Way Vertical 4 1/2 hp Model E, Type C
>
>
> > Hi Rick, great shots, as mine is missing the fan assembly it will be a
> > great
> > help to me, if you can when you remove the fan can you take some shots
of
> > how the drive pulley and pipe etc all goes together as that is my next
> > fabricating job,
> > Cheers Chester from West Aussie.
> >
> >
> > ----- Original Message ----- 
> > From: "Richard Strobel" <Richard_Strobel7 at msn.com>
> > To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> > Sent: Wednesday, October 12, 2005 12:17 AM
> > Subject: Re: [SEL] New Way Vertical 4 1/2 hp Model E, Type C
> >
> >
> > >    Ok Missy, Curt and gang (women come first in Mt. :-))  I went out
and
> > > shot around 20 pix's
> > >
> > > If they don't show up wait and hour or so as it takes Webshots a while
> > > to
> > > digest them.
> > >
> > > Hope this helps.  I'll try to get a diameter/circumference of the fan
> > assy.
> > > The outer ring does turn with the blades.  The album title says 4 hp
but
> > > it's a 4 1/2.
> > >
> > > http://community.webshots.com/album/471752277SOWnom
> > >
> > > Speaking of Webshots..I've never received any bill or statement and I
> > don't
> > > like suprises..are you subscribers getting any?
> > >
> > > Let me know if a certain area needs a better pix.
> > >
> > > "headed fer the shed"
> > > RickinMt.
> > >
> > >
> > >
> > > _______________________________________________
> > > SEL mailing list
> > > SEL at lists.stationary-engine.com
> > > http://www.stationary-engine.com/mailman/listinfo/sel
> >
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> >
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel