[SEL] New Way Vertical 4 1/2 hp Model E, Type C

[Richard Strobel]

Chester..here's the best I can do with what I got..this is just the 
shaft..other components will be measured ASAP

Any questions, just holler,

And of course all measurements are in inches and/or decimals there of

Might be handy also if once downloaded you clicked on the bigger picture.

Hope this helps and good luck

http://community.webshots.com/photo/471752277/480760660hhdskP

RickinMt.






----- Original Message ----- 
From: "SERVICE" <edwards_service at westnet.com.au>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, October 11, 2005 10:19 PM
Subject: Re: [SEL] New Way Vertical 4 1/2 hp Model E, Type C


> Hi Rick, great shots, as mine is missing the fan assembly it will be a 
> great
> help to me, if you can when you remove the fan can you take some shots of
> how the drive pulley and pipe etc all goes together as that is my next
> fabricating job,
> Cheers Chester from West Aussie.
>
>
> ----- Original Message ----- 
> From: "Richard Strobel" <Richard_Strobel7 at msn.com>
> To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> Sent: Wednesday, October 12, 2005 12:17 AM
> Subject: Re: [SEL] New Way Vertical 4 1/2 hp Model E, Type C
>
>
> >    Ok Missy, Curt and gang (women come first in Mt. :-))  I went out and
> > shot around 20 pix's
> >
> > If they don't show up wait and hour or so as it takes Webshots a while 
> > to
> > digest them.
> >
> > Hope this helps.  I'll try to get a diameter/circumference of the fan
> assy.
> > The outer ring does turn with the blades.  The album title says 4 hp but
> > it's a 4 1/2.
> >
> > http://community.webshots.com/album/471752277SOWnom
> >
> > Speaking of Webshots..I've never received any bill or statement and I
> don't
> > like suprises..are you subscribers getting any?
> >
> > Let me know if a certain area needs a better pix.
> >
> > "headed fer the shed"
> > RickinMt.
> >
> >
> >
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>