[SEL] New Way Vertical 4 1/2 hp Model E, Type C

[Richard Strobel]

Well thanks in anticipation Steve.  Will let the plug go for another 
day..ha, ha.

Richard_Strobel7 at msn.com

later,
Rick


----- Original Message ----- 
From: "Steve Royster" <steve_royster at hotmail.com>
To: <sel at lists.stationary-engine.com>
Sent: Tuesday, October 11, 2005 4:06 PM
Subject: RE: [SEL] New Way Vertical 4 1/2 hp Model E, Type C


> Hi Rick I'll send pics of my new way mixer, I think you could easily make
> one.  as for the new way spark plug, it might cost what your engine did!
> Steve
>
>
> >From: "Richard Strobel" <Richard_Strobel7 at msn.com>
> >Reply-To: The SEL email discussion list <sel at lists.stationary-engine.com>
> >To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> >Subject: [SEL] New Way Vertical 4 1/2 hp  Model E, Type C
> >Date: Tue, 11 Oct 2005 06:52:34 -0600
> >
> >Thanks for the reply Tim.  I have a fairly good idea now on where the 
> >carb
> >is located and was very surprised to see it way down next to the base.
> >Makes sense tho seeings as how there's no fuel pump.  I've got a classic
> >Zenith which I'll use until the right one shows up.  I've contacted all 
> >the
> >vendor's ..to no avail.  50 rocket finder fee to anyone who can find me
> >one!! for a decent price.
> >
> >   Is there anyone on the list that has a New Way and can snap a few
> >pix's?..you'd be my friend forever..this is a very kewl engine!!!
> >
> >   Seeings as how this is spark plug fired, do I need a Buzz box, i.e. 
> > Ford
> >coil or equivalent?  I see what appears to be a spark saver.  Wouldn't it
> >be
> >kewl also to find a New Way Spark Plug?  guess they imported the 
> >porcelain.
> >
> >   And on another final note (and the crowd goes wild), whatcha all think
> >about lifting a engine using the spark plug hole?  I personally don't 
> >like
> >it.
> >
> >Ya'll have a nice day
> >RickinMt.
> >
> >
> >----- Original Message -----
> >From: "Tim Christoff" <tchristoff at earthlink.net>
> >To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> >Sent: Monday, October 10, 2005 9:04 PM
> >Subject: RE: [SEL] In need of a BIGGER doghouse:-)
> >
> >
> > >
> > >
> > > >   It's a 4 1/2 hp, stuck, and need a carby bad for it.
> > >
> > > > and a close up of the fan.  Is that an oil line and does this baby
> >have
> > > an
> > > > oil pump?
> > >
> > >
> > > It is an oil line but it does not have an oil pump and those lines 
> > > don't
> > > do
> > > much good, you usually need to oil the fan manually from time to time.
> > > The
> > > mixer will set you back around $125-$150 if you can find one.  My 
> > > guess
> >is
> > > you will have better luck getting someone to cast one for you.
> > >
> > > Tim Christoff
> > >
> > >
> > >
> > > _______________________________________________
> > > SEL mailing list
> > > SEL at lists.stationary-engine.com
> > > http://www.stationary-engine.com/mailman/listinfo/sel
> > >
> >_______________________________________________
> >SEL mailing list
> >SEL at lists.stationary-engine.com
> >http://www.stationary-engine.com/mailman/listinfo/sel
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>