[SEL] New Way Vertical 4 1/2 hp Model E, Type C

[Steve Royster]

Hi Rick I'll send pics of my new way mixer, I think you could easily make 
one.  as for the new way spark plug, it might cost what your engine did!  
Steve


>From: "Richard Strobel" <Richard_Strobel7 at msn.com>
>Reply-To: The SEL email discussion list <sel at lists.stationary-engine.com>
>To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
>Subject: [SEL] New Way Vertical 4 1/2 hp  Model E, Type C
>Date: Tue, 11 Oct 2005 06:52:34 -0600
>
>Thanks for the reply Tim.  I have a fairly good idea now on where the carb
>is located and was very surprised to see it way down next to the base.
>Makes sense tho seeings as how there's no fuel pump.  I've got a classic
>Zenith which I'll use until the right one shows up.  I've contacted all the
>vendor's ..to no avail.  50 rocket finder fee to anyone who can find me
>one!! for a decent price.
>
>   Is there anyone on the list that has a New Way and can snap a few
>pix's?..you'd be my friend forever..this is a very kewl engine!!!
>
>   Seeings as how this is spark plug fired, do I need a Buzz box, i.e. Ford
>coil or equivalent?  I see what appears to be a spark saver.  Wouldn't it 
>be
>kewl also to find a New Way Spark Plug?  guess they imported the porcelain.
>
>   And on another final note (and the crowd goes wild), whatcha all think
>about lifting a engine using the spark plug hole?  I personally don't like
>it.
>
>Ya'll have a nice day
>RickinMt.
>
>
>----- Original Message -----
>From: "Tim Christoff" <tchristoff at earthlink.net>
>To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
>Sent: Monday, October 10, 2005 9:04 PM
>Subject: RE: [SEL] In need of a BIGGER doghouse:-)
>
>
> >
> >
> > >   It's a 4 1/2 hp, stuck, and need a carby bad for it.
> >
> > > and a close up of the fan.  Is that an oil line and does this baby 
>have
> > an
> > > oil pump?
> >
> >
> > It is an oil line but it does not have an oil pump and those lines don't
> > do
> > much good, you usually need to oil the fan manually from time to time.
> > The
> > mixer will set you back around $125-$150 if you can find one.  My guess 
>is
> > you will have better luck getting someone to cast one for you.
> >
> > Tim Christoff
> >
> >
> >
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> >
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel