[SEL] piston rings and bores.

[Rob Skinner]

> Anyone have good results with "Gapless" rings?

If by "Gapless" you mean the trademarked name for the rings manufactured by
Total Seal, then no.  If we're talking about a generic term for rings without a
straight-through gap, then yes.  

I had some rings made up with notched, interlocking ends, like a ship-lap board.
I've also used two rings per groove, with the gaps offset.  The "gapless" rings
performed as expected.

=-=-=-=-=-=
Rob Skinner
La Habra, California
mailto:rskinner at rustyiron.com
http://www.rustyiron.com