[SEL] piston rings and bores.

[bill at antique-engines.com]

>I've also used two rings per groove, with the gaps offset<

I've seen and used sets sold that way.

Bill

>
>> Anyone have good results with "Gapless" rings?
>
> If by "Gapless" you mean the trademarked name for the rings manufactured
> by
> Total Seal, then no.  If we're talking about a generic term for rings
> without a
> straight-through gap, then yes.
>
> I had some rings made up with notched, interlocking ends, like a ship-lap
> board.
> I've also used two rings per groove, with the gaps offset.  The "gapless"
> rings
> performed as expected.
>
> =-=-=-=-=-=
> Rob Skinner
> La Habra, California
> mailto:rskinner at rustyiron.com
> http://www.rustyiron.com
>
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>