[SEL] RE: Petter Gib Key Update - Need Help!!!

[Kerry]

G'Day Ken

Thanks for the great Pics, never tried quite the same way, but will remember 
for next time
All the best

Kerry Morris
Lithgow NSW Oz

>
> I seem like you have access to a welder, so before starting with the
> Drilling route why not try one more thing with the welder.  I tried the
> slide hammer on a key and had zero success so I had a big bolt welded to
> the end of the key, threads pointing out.  Then i slipped a piece of
> pipe over the bolt, added a couple of washers, the nut and with the use
> of a 1/2 breaker bar i tourqued it out.  You can see it on my Webshots
> site to see what i mean.  You can always drill it if this last step
> fails.  http://community.webshots.com/photo/81062075/81062075YhFfyQ
>