[SEL] Need Help with 1-1/2 HP Petter

[Germoamer at aol.com]

In a message dated 3/24/2005 7:33:27 PM Eastern Standard Time, 
paulmaples at sbcglobal.net writes:

<< I guess I 
 will try and drill it out and hope I don't run off center and get into the 
 flywheel. >>
Paul,

Good sharp bit and as suggested use a piece of pipe clamped in the key groove 
for a guide.  You can try first drilling, tapping then welding to a bolt.  If 
that does not work, you can then drill to bigger size and break out as 
suggested.

Tom Schmutz
Concord, Va. USA
Germoamer at aol.com