[SEL] "Free wheel, Locked wheel"

[Richard Strobel]

Thats the way I would think it would work also.  Thanks Jack!! It will be 
fun playing with the setup when we get her going.

later,
RickinMt.


> With most of the fast & loose pulley systems I've seen (and used!), the
> fast and loose pulleys were crowned but there was no crowning on the
> double-width driver.
> The shifting-gear (usually overhead and actuated by either a long lever
> or a rope) has guides to push the belt sideways as required, but is not
> required to act as an alignment device. In fact, when properly set up,
> the guides stand clear of the edges of the belt except when shifting the
> belt across.
>
> Jack in Oz
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>