[SEL] New Way Mixer Re-Casting

[Curt]

Rick,
If you don't want to take it apart sounds like the only choice you have 
is to make a wooden pattern to get the part shape you want.
But even more important is that you need to make a core box. If you send 
Rick the part or make a plain pattern you would get a solid chunk 
instead of a hollow chunk. There will need to be core prints on each end 
that will hold the core. The core box will make 1/2 the core and the two 
halves glued together make the complete core.
You might run an ad on Harrys and see if someone has already made this 
part part before making a pattern.
BTW the numbers can be bought from Freeman Supply and superglued on the 
pattern.
Curt Holland
Gastonia, NC

Richard Strobel wrote:

>  I would like Rick to make me a re-cast, but don't want to disassemble the 
>choke assembly for fear of destroying something original i.e. "peaned choke 
>butterfly shaft ends.
>
>  
>