[SEL] Kwik-Poly

[Dave Rotigel]

At 11:38 AM 12/4/2005, you wrote:
> > Hi Rob, You may want to check with Dale, but I believe that
> > TWO COATS are  not good since QP will not adhere to itself.
> >          Dave
>Hiya Dave,
>Suppose I wanted to do a second coat on a tank that had previously been KP'ed
>and used for a few years.  Is there a procedure for that?
>Rob

Hi Rob,
         Somewhere I think I heard something about etching the QP before re 
coating an old application. Not sure, however, what should be used for the 
etching. Perhaps Charlie or Joe would know.
         Dave
PS, I know that I once used QP on a new tank with BAD results. It did not 
adhere to the inside of the tank and flaked off after a brief time. I 
suspect that I should have cleaned the inside of the tank with acid prior 
to using the QP. That was MY FAULT and in NO WAY the fault of the QP!