[SEL] Silage Chopper - Need I.D.

[paulmaples at sbcglobal.net]

Thanks Steve for response and excellent pictures, I love your machines. Your 
Appleton looks a little like the corn chopper I have but it is obviously 
not. If you do get time to research it and find something I certainly would 
appreciate your time and effort.

Thanks again,

Paul

----- Original Message ----- 
From: "Steve Barr" <stevebarr at ameritech.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, September 28, 2004 7:20 PM
Subject: Re: [SEL] Silage Chopper - Need I.D.


> Paul
>
> No idea on he maker yet.  I will have to check several books to see If I
> can match any casting #'s.
>
> I hae an Appleton #9 awaiting some minor wood work.
> http://www.oldengine.org/members/sbarr/EngineEquip/CornChopper.htm
>
> I also picked up the monster...A small 4 roll Appleton Husker Shredder
> which takes the entire stalk, pops the ear of corn off, drops the ear onto
> the rollers which removes the husks, sending the ear up the track intoa
> wagon...The stalk meanwhile, goes thru the same setup as the chopper and
> sends it thru a blower into a silo or pile.   I finally had it out to a
> show to test run it and it needs a little work but is working. Pics:
> http://www.oldengine.org/members/sbarr/images/Shows/2004SandwichFair/3/26.JPG
> http://www.oldengine.org/members/sbarr/images/Shows/2004SandwichFair/3/27.JPG
> http://www.oldengine.org/members/sbarr/images/Shows/2004SandwichFair/3/28.JPG
> http://www.oldengine.org/members/sbarr/images/Shows/2004SandwichFair/3/29.JPG
>
>