[SEL] Mag Help

[Jeff Allen]

Dave,

My experience is that the magnets don't have much pull when in the mag. This 
is from the Websters I've played with. Take the magnet out and it should 
have good pull on a wrench. Hope this helps.

Jeff Allen
----- Original Message ----- 
From: "Dave Mayfield" <wrl at gwltd.com>
To: <SEL at lists.stationary-engine.com>
Sent: Thursday, October 07, 2004 7:46 PM
Subject: [SEL] Mag Help


Well, I said eariler that I had the Stover Ct 1 running and I did. I got 
home tonight and turned it over several times and it fired up and ran for 
awhile till, I shut it off, then I wanted to seei f it would start again. It 
would not. It is raining out and damp air tonight, not sure if that would 
matter any or not.

Here is my question. It seems to me that the mag is not real hot. It's Wico 
EK. It has the original coils. But seems weak to me. The magnets seem weak, 
when I place a small end wrench on the magnets I can feel the pull, but it's 
weak. I have magnets on my Fridge that seem stronger. Any ideas?

Dave
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel