[SEL] Economy Buzzrig Birthday Present

[Steve Barr]

Luke

Here is a little larger ~7hp galloway that has a galloway rotary mag..Not
sure who made it for them. Wizzard? This one has the coil inside of the
magnets.  I have 2 wizzards on the shelf with plans to use them on a
challenge or two with separate coils.

http://www.oldengine.org/members/sbarr/images/Shows/2004Baraboo/Engines/2/05.JPG

http://www.oldengine.org/members/sbarr/images/Shows/2004Baraboo/Engines/2/06.JPG

http://www.oldengine.org/members/sbarr/images/Shows/2004Baraboo/Engines/2/08.JPG

You might need to check for link wrapping.

Steve
--- Luke Tonneberger <flywheelin at hotmail.com> wrote:
Hi Paul,

I have a different setup from the sounds of your description. Mine is set
up for a friction drive rotary mag off the flywheel. You can see a picture
of the bracket here:
 
http://www.oldengine.org/members/luket/galloway/galloway3.jpg
 
I'll probably just try to find one that will match up to the slots in
the bracket. Thanks.

Luke Tonneberger
Rockford, Michigan
USA
 
===============
 
From: "Paul Russell" <hit_n_miss at tc3net.com>

Luke, don't know if you found what you are looking for but I have a 5 or 6
hp Galloway with the mag, and gear guard on it. Brkt # 00 02, I think, as
it was through a mirror and buried. Can get you a picture if you want.

Paul Russell
Riga, Michigan
hit_n_miss at tc3net.com


----- Original Message -----
From: "Luke Tonneberger" <flywheelin at hotmail.com>

Hi John,

Do you have any idea what rotary mag Galloway put on their engines?

Luke Tonneberger
Rockford, Michigan
USA


=====
++++++++++++++++++++++++++++++++++++++++++
Steve Barr                N9NDE            Downers Grove, IL
          http://www.oldengine.org/members/sbarr
                      stevebarr at ameritech.net
++++++++++++++++++++++++++++++++++++++++++