[SEL] Hercules XK revisited
Curt Holland
curt at imc-group.com
Tue Jun 8 10:02:03 PDT 2004
Tom,
On my 6HP flywheels there are the 3 holes about 3" in diameter. Very
near the split hub is another smaller hole about an 1 1/2 in diameter
that serves the same purpose you mention for the expansion/contraction.
What HP are you looking at? You can see the smaller holes in this picture:
http://www.oldengine.org/members/holland/images/6Hercules/Flywheels/P4170006c.jpg
Curt Holland
Gastonia, NC
Germoamer at aol.com wrote:
>While in one of the outbuildings this morning, I stopped and looked at a
>Hercules XK and studied the 3 hole flywheels. A thought as to why they are there
>came to me, and you have to understand by brain to appreciate the significance
>that! The flywheel hub is split with a bolt to hold onto the crank with a
>straight key. The split is directly centered in one of the flywheel holes.
>Would not that hole then be there to permit minor expansion/contraction of the
>flywheel as it is tightned/loosened on the crankshaft? The other two holes
>would then be there to balance the flywheel, or also to permit
>expansion/contraction.
>
>
>
More information about the sel
mailing list