[SEL] Miami Project #2

Glenn A Karch glenn.karch at gte.net
Wed Aug 18 16:10:17 PDT 2004


Tommy,

Is the Miami one of those two log spittler engines you had loaded on your
trailer a few years ago at Coolspring?  Was it the one with the wedge on the
flywheel?  One engine was a Falk as I remember?

Glenn

Glenn Karch
Haubstadt, IN, USA
Hercules Historian
----- Original Message -----
From: "Tommy Turner" <lcjudge at scrtc.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Wednesday, August 18, 2004 2:38 PM
Subject: Re: [SEL] Miami Project #2


> Dave,
>
>     I did have some but they were on my old computer hard drive and
> lightning got it about 3 weeks ago.  I have a friend trying to see if he
> can retrieve any of the info off of it.  If so, I'll be glad to post
> them.  All there was of the Miami was a base, flywheels, and
> crankshaft.  The front half of the cylinder had been cut off and it had
> been made into a wood splitter.
>
> Tommy Turner
> Magnolia, KY
>
>
>
> Dave Otto wrote:
>
> >Outstanding work Tommy!
> >
> >Thank you for taking the time to post the pictures. I would like to see
> >some before pictures of "your" engine, do you have any?
> >
> >
> >Dave
> >
> >
> >Dave Otto
> >Boise, Idaho
> >
> >
> >-----Original Message-----
> >From: sel-bounces at lists.stationary-engine.com
> >[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Tommy
> >Turner
> >Sent: Tuesday, August 17, 2004 6:57 PM
> >To: The SEL email discussion list
> >Subject: [SEL] Miami Project #2
> >
> >I showed some photos a couple of weeks ago of the Miami project.  As I
> >mentioned then, I was able to borrow Jerry Toews 6 HP Miami to use for
> >pattern purposes, measurements, etc.  What a great friend.  The engine
> >was just a bare engine with no skidding, fuel system, etc.  I told Jerry
> >
> >that I would deliver the engine back to him in running condition, with a
> >
> >cooling tank, skidding, battery box, fuel system take care of any
> >machine work needed, make repairs needed, etc.  Here are some photos of

> >the engine during assembly.  I'll post some completed photos soon.
> >Click on the thumbnails and they will enlarge. There is caption info
> >directly under the photo in the center.  If you have filters, they may
> >not let you access this site (Epson Photo) unless you turn them off.
> >
> >http://albums.photo.epson.com/j/AlbumIndex?u=3009203&a=31374063&f=
> >
> >Tommy Turner
> >Magnolia, KY
> >
> >
> >
> >
> >_______________________________________________
> >SEL mailing list
> >SEL at lists.stationary-engine.com
> >http://www.stationary-engine.com/mailman/listinfo/sel
> >
> >
> >_______________________________________________
> >SEL mailing list
> >SEL at lists.stationary-engine.com
> >http://www.stationary-engine.com/mailman/listinfo/sel
> >
> >
> >
> >
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel




More information about the sel mailing list