[SEL] Fairbanks

[Dave Ernst]

Now this is getting more interesting all the time. The previous owner gave
me the tag, which says it's a FM Z, 6 hp. Now that I look, I find no
mounting holes...
Does anyone have a picture or link I can go to and see one complete?
Thanks very much for the info.
Dave
----- Original Message ----- 
From: <Vivas1993 at aol.com>
To: <sel at lists.stationary-engine.com>
Sent: Wednesday, August 11, 2004 5:55 PM
Subject: Re: [SEL] Fairbanks


> Hi Folks,
>  The engine pictured was built by Waterloo engine Co., I'm not sure of the
> name it carried when sold. The long pipe with the cap on the end is the
mixer,
> the gas line was hooked to the 1/4 " pipe. Hook a battery & low tension
coil to
> the ignitor, that's all of the electrical connection needed. I doubt that
it
> was run on propane, I have a 4hp & a 1 1/2hp Waterloo, they are built
pretty
> much the same as your engine.
>  Good luck on you engine !
>  Dwight
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>