[SEL] Fairbanks

[Steve Barr]

Dave

Waterloo Built engines for many different companies.  You should be able
to locate a serial # on the ignitor side of the crankshaft.  The tag on
these engines are often missing, but were located on the off side
(opposite the ignitor) base.

You can see pics of my 2hp Majestic (simular hopper) at:
http://www.oldengine.org/members/sbarr/MyEngines/majestic2hp.htm

A serial # list for Waterloo built engines is located at:
http://www.majesticengine.com/serial.html

If you can measure the bore, we should be able to determine the hp.

Steve
--- Dave Ernst <shop at cccomm.net> wrote:

> Now this is getting more interesting all the time. The previous owner
> gave
> me the tag, which says it's a FM Z, 6 hp. Now that I look, I find no
> mounting holes...
> Does anyone have a picture or link I can go to and see one complete?
> Thanks very much for the info.
> Dave
> ----- Original Message ----- 
> From: <Vivas1993 at aol.com>
> To: <sel at lists.stationary-engine.com>
> Sent: Wednesday, August 11, 2004 5:55 PM
> Subject: Re: [SEL] Fairbanks
> 
> 
> > Hi Folks,
> >  The engine pictured was built by Waterloo engine Co., I'm not sure of
> the
> > name it carried when sold. The long pipe with the cap on the end is
> the
> mixer,
> > the gas line was hooked to the 1/4 " pipe. Hook a battery & low
> tension
> coil to
> > the ignitor, that's all of the electrical connection needed. I doubt
> that
> it
> > was run on propane, I have a 4hp & a 1 1/2hp Waterloo, they are built
> pretty
> > much the same as your engine.
> >  Good luck on you engine !
> >  Dwight
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> >
> >
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>