[SEL] Model Engine Coil

[grookus2 at comcast.net]

try zacks, he has adds in gem and farm collector. I have one and works great. 

----- Original Message -----

From: "Reg" <randmingold at hotkey.net.au> 
To: "The SEL email discussion list" <sel at lists.stationary-engine.com> 
Sent: Friday, October 31, 2014 6:42:32 AM 
Subject: Re: [SEL] Model Engine Coil 

If you want to use 12v on a low tension setup, a Ballast out of a fluro 
light fitting works well. 
Also, the primary winding of a car coil is ok. 
You only need a coil to give a back EMF so the spark has the guts to jump as 
the points open. 
Reg 

-----Original Message----- 
From: cgandree at mchsi.com 
Sent: Friday, October 31, 2014 9:06 PM 
To: SEL Lists ; Old eng list 
Subject: [SEL] Model Engine Coil 

Hi All, 
Where can I get a coil for my scale model R&V engine? 
Thank you in advance, 
Curt 
_______________________________________________ 
SEL mailing list 
SEL at lists.stationary-engine.com 
http://www.stationary-engine.com/mailman/listinfo/sel 

_______________________________________________ 
SEL mailing list 
SEL at lists.stationary-engine.com 
http://www.stationary-engine.com/mailman/listinfo/sel