[SEL] Igniter gasket material

[Patrick Livingstone]

I sadly have to back Reg here :)
A few of my engines have teflon in the ignitors and they have given no
trouble. Some of the engines have been running for over 10 years using
teflon in the ignitors.
Patrick

Patrick M Livingstone
0418 692013
Earlwood NSW
http://www.oldengine.org/members/pml/Index.html



On 26/05/14 11:50 AM, "Reg Ingold" <randmingold at hotkey.net.au> wrote:

>I assume you are referring to the working parts of the unit?
>I have used white teflon with success in the past.
>A number of my engines, now with new owners, were repaired this way,
>along 
>with a lot of model units that I have built.
>I replaced the mica tubes and insulating washers, etc. with it and it
>never 
>gave any trouble from heat or 'current leak'.
>To my knowledge, they are all still running ok.
>I hope this helps
>Reg
>Reg & Marg Ingold
>Newcastle NSW Australia
>randmingold at hotkey.net.au
>http://www.oldengine.org/members/randmingold
>----- Original Message -----
>From: "Leroy Clark" <1oldengin at gmail.com>
>To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
>Sent: Monday, May 26, 2014 11:03 AM
>Subject: [SEL] Igniter gasket material
>
>
>>I need some Good stuff for my igniter in the Sparta. Any help here? Leroy
>> Clark
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel