[SEL] JD model E lost its spark

[cgandree at mchsi.com]

Hi Doug,
I will rig a battery and coil later this am at the show grounds to see if it will run plus responded to Ed's suggestion to clean the commutator.
Thanks,
Curt
----- Original Message -----
From: "Doug Tallman" <dtallman at accnorwalk.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Friday, August 1, 2014 7:50:03 AM GMT -06:00 US/Canada Central
Subject: Re: [SEL] JD model E  lost its spark

Curt, unhook the mag wire and ground it. rig up a battery and coil to 
the igniter and see if it will start. that will eliminate everything but 
the mag. Can you take the pickup brush out of the mag without removing 
it?  Doug T




cgandree at mchsi.com wrote:
> Hey guys last fall at a small one day show I was attempting to grind corn and while attaching the belt from my grinder to my
> John Deere 1 1/2hp E had the belt catch and pull the grinder right into my JD causing a a big tangle in the belt and damaging my grinder hopper as well as twisting the belt up and flipping the engine over........very dumb not fastening the two down and way too light an engine. Any way now I am not able to even start the JD.  Left it sit over the winter tried to start her the other day but no go. Drained the old gas out and removed the check valve and cleaned it. I am not sure how to test the low tension mag but read in the JD inst book that you disconnect your mag wire and touch it to a bright spot on you ignitor spring while cranking engine over.  Did that and had no spark.
> Any one ever have this happen and what is the fix????  I hate the idea of taking the mag off due to the time consuming work of remaking gaskets and getting an oil tight seal, etc.  This engine has always been an easy starter until now.
>
> Any and all suggestions would be appreciated.
> Curt Andree
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>
>   

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel