[SEL] gluing plastic OT

[Arnie Fero]

Tom,

Your biggest challenge will be trying to identify the type of plastic.
Best bet?  Call John Deere, explain your problem, then hit the net looking
for an adhesive that works with that plastic.  GOOD LUCK!

See ya,  Arnie

On Fri, March 9, 2012 12:12 pm, Germoamer at aol.com wrote:
> I own a John Deere lawnmower with a plastic hood.  I have developed a
> crack in the hood near where it latches on each side of the mower.  At this
> same location the upper and lower halves of the hood are bolted together
> and the  nut area has broken out a piece of the plastic.
>
> Any suggestions for a good thin "crazy" type glue.  I need something  thin
> that will go into the crack.   At one time I worked for Eastman  Kodak,
> and the Eastman 910 glue was great stuff.