[SEL] I just found a 5 3/4 inch piston out in my shop

[John & Beryl Cooper]

Hi again Roger,
Still having trouble with your direct address. I have checked out the piston
in my Bagshaw. Unfortunately it won't fit, mine is 8'X 5&1/2". Pin is 1&1/2"
and 4" from the top. 3 rings 3/8".
Thanks again,
John Cooper.

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Roger DiRuscio
Sent: Tuesday, 5 June 2012 12:44 AM
To: 'The SEL email discussion list'
Subject: Re: [SEL] I just found a 5 3/4 inch piston out in my shop


John Cooper,
I put the piston on eBay yesterday, take a look at it

Roger DiRuscio
-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of John & Beryl
Cooper
Sent: Sunday, June 03, 2012 10:42 PM
To: 'The SEL email discussion list'
Subject: Re: [SEL] I just found a 5 3/4 inch piston out in my shop

Hi Mark,
I have a 6 HP Bagshaw which appears to be a copy of a Fairbanks, I need a
new piston about that size.Wondering if it will fit.I can get the diameter
but would need to take the piston out to get the other measurements.
John Cooper,
BEGA,
Australia.



_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel