[SEL] 9 hp Galloway setback

[Skip Landis]

Rick, why not fit a piece in it?  skip



________________________________
 From: Richard Strobel <Richard_Strobel7 at msn.com>
To: The SEL email discussion list <sel at lists.stationary-engine.com>; stationary-engine <stationary-engine at oldengine.org> 
Sent: Monday, January 30, 2012 12:26 PM
Subject: [SEL] 9 hp Galloway setback
 
Howdee all;

  Well after pressure washing out the gunk behind the piston, it now shows 
~1" x 2" chunk out of the piston skirt.  So we are looking for one...6-1/2" 
dia. bore and piston is ~8-1/2" long.  Piston is still stuck so we can't get 
exact measurements.

  If all else fails we will have to have one made so are there any 
recommendations out there for having one made?

Thanks much!!
RickinMt. 

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel