[SEL] Condensation problem in shop

[Keith Kinney]

Around our parts the roof needs to be insulated, even if it's just the 1/4" of bubble wrap looking stuff.  The other thing is to install a vapor barrier under the floor.
Keith


On Jan 18, 2011, at 10:53 AM, Best, George wrote:

> I know this isn't a problem for some of you. 
> You may live in a dry climate or may have a heated shop building.
> 
> However, in my case I have an unheated shop building in a wet climate.
> I do have a wood stove that gets used occasionally to warm up part of the shop if I'm working.
> 
> The problem is especially after periods of cold weather followed by warmer weather, 
> all the metal (machine tools, engines, etc) will be covered with condensation.
> 
> I can't afford to keep a 30x60 building heated so wonder what my other options are.
> 
> I've read some people have had luck using ceiling or box fans to keep the air moving in their buildings,
> and that has resolved the problem.
> 
> However, I don't want to be running fans in the building all the time if it isn't needed.
> 
> George
> 
> 
> This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel

Keith Kinney
kkinney at herculesengines.com
WWW.HerculesEngines.com