[SEL] Condensation problem in shop

[Arnie Fero]

George,

At Coolspring they cover all of the exposed metal with a coating of grease as a part
of the "winterizing" process.

As others have mentioned, the laws of nature are against you unless you can afford
to seal and heat the building, and you said that option was off the table.

See ya,  Arnie

On Tue, January 18, 2011 11:53 am, Best, George wrote:
>
> However, in my case I have an unheated shop building in a wet climate.
> I do have a wood stove that gets used occasionally to warm up part of the shop if
> I'm working.
>
> The problem is especially after periods of cold weather followed by warmer weather,
> all the metal (machine tools, engines, etc) will be covered with condensation.
>